|
|
Sound Module for Evaluation Kit
Priškin, Jiří ; Číž, Radim (referee) ; Sysel, Petr (advisor)
This thesis is dealing with design and putting into operation of sound module for evaluation kit Atmel ATSTK1000. At the beginning, there is an introduction with properties, hardware and software equipment of the evaluation kit which is used for development of embedded devices based on AT32AP7000. The microcontroller AP7000 is a complete system on chip with an AVR32 microprocessor core, containing additional supporting circuits, controllers and interfaces which the core itself does not have included. However, there is no digital to analog converter for audio signal processing. This has led to design an additional module performing this task. A part of thesis describes Intel AC‘97 standard including AC-link interface, which is used for full-duplex data transmission between realized sound module and the evaluation kit STK1000. The sound module is designed as a plug-in card. The last chapter presents the Linux operating system installation process as an SD/MMC Flash memory card boot image creation and test of the sound module under ALSA architecture.
|
|
|
IoT Based on SoC MT7688
Lužný, Jakub ; Korček, Pavol (referee) ; Vašíček, Zdeněk (advisor)
This thesis deals with the development of an embedded device for Internet of Things based on the MediaTek MT7688A platform. It explores the capabilities of this platform and available System on Module solutions. Based on this findings, a fully functional prototype of such a device is implemented. To demonstratie abilities of the device, a web application is programmed that shows the data received over Wireless M-Bus bus.
|
|
|
Proportional counter measurement system
Kolář, Ondřej ; Matěj, Zdeněk (referee) ; Kubíček, Michal (advisor)
This work focuses on development of a measurment system for proportional counters that are used to measure ionizing radiation. The system allows for data acquisition from proportional counters in form of time waveforms for further analysis. Core of the system is a Red Pitaya STEMlab 125-14 board which is able to record fast signals and transfer them to a computer for further processing. The first part of this work briefly describes theory of ionizing radiation and propotional counters. In the following part the measuring unit and its improvements are described. The main part of this work is focused on development of new software and description of individual software pieces. In the last part a real measurement is depicted, gathered data are analyzed and a machine learning method is proposed as a solution for proportional counters data analysis.
|
|
|
Web server with ARM microprocessor
Tesař, Jan ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
Diploma thesis is dealing with design and implementation of the web server and manage- ment website in the developing kit FriendlyARM Mini6410 with installed OS GNU/Linux. The embedded packaging system PTXdist is described in terms of Kernel configuration and selection of suitable applications. The device should be later used for the remote management of atmospheric optical link.
|
|
|
PLC PFC200 Benchmarking
Majchrák, František ; Pásek, Jan (referee) ; Arm, Jakub (advisor)
The paper analyzes the possibilities of benchmarking PLC PFC200 from WAGO. The first part of the paper is dedicated to functional approximation of the machine, its possible use, individual programming options, to get acquainted with the possibilities of implementing its own program blocks in embedded Linux environment and determine their interconnection possibilities with PLC environment. In the second part I focus on benchmarking, benchmarking types, a description of certified measurements and assessment of measurement. The last part explains an application that displays the load of the entire PLC system.
|
|
|
Visualization of Information in Intelligent Home
Sakin, Martin ; Viktorin, Jan (referee) ; Korček, Pavol (advisor)
This thesis describes the design and implementation of a graphical application that shows the status of intellingent home. Application run directly on the adapter that communicates with sensors and actuators. Its graphical output can be displayed via the HDMI connector or remotely over X-Server. The application is implemented in C++ and using the Qt graphics libraries. The goal is simply and clearly to display important information about the household even in case of failure of the LAN.
|
|
|
Proportional counter measurement system
Kolář, Ondřej ; Matěj, Zdeněk (referee) ; Kubíček, Michal (advisor)
This work focuses on development of a measurment system for proportional counters that are used to measure ionizing radiation. The system allows for data acquisition from proportional counters in form of time waveforms for further analysis. Core of the system is a Red Pitaya STEMlab 125-14 board which is able to record fast signals and transfer them to a computer for further processing. The first part of this work briefly describes theory of ionizing radiation and propotional counters. In the following part the measuring unit and its improvements are described. The main part of this work is focused on development of new software and description of individual software pieces. In the last part a real measurement is depicted, gathered data are analyzed and a machine learning method is proposed as a solution for proportional counters data analysis.
|
|
|
IoT Based on SoC MT7688
Lužný, Jakub ; Korček, Pavol (referee) ; Vašíček, Zdeněk (advisor)
This thesis deals with the development of an embedded device for Internet of Things based on the MediaTek MT7688A platform. It explores the capabilities of this platform and available System on Module solutions. Based on this findings, a fully functional prototype of such a device is implemented. To demonstratie abilities of the device, a web application is programmed that shows the data received over Wireless M-Bus bus.
|
|
|
PLC PFC200 Benchmarking
Majchrák, František ; Pásek, Jan (referee) ; Arm, Jakub (advisor)
The paper analyzes the possibilities of benchmarking PLC PFC200 from WAGO. The first part of the paper is dedicated to functional approximation of the machine, its possible use, individual programming options, to get acquainted with the possibilities of implementing its own program blocks in embedded Linux environment and determine their interconnection possibilities with PLC environment. In the second part I focus on benchmarking, benchmarking types, a description of certified measurements and assessment of measurement. The last part explains an application that displays the load of the entire PLC system.
|
|
|
Visualization of Information in Intelligent Home
Sakin, Martin ; Viktorin, Jan (referee) ; Korček, Pavol (advisor)
This thesis describes the design and implementation of a graphical application that shows the status of intellingent home. Application run directly on the adapter that communicates with sensors and actuators. Its graphical output can be displayed via the HDMI connector or remotely over X-Server. The application is implemented in C++ and using the Qt graphics libraries. The goal is simply and clearly to display important information about the household even in case of failure of the LAN.
|
guest ::
